Strong permeability in difficult areas and where the build up is severe
Surprisingly, AQUAnax can be used in many different situations!
- ●Removes stubborn stains in the kitchen with strong detergency
- ●Also everyday use with strong detergency
AQUAnax's high permeability allows it to enter between the space in dirt and grime!
AQUAnax works via penetrating between the spaces in dirt and grime, breaking down its structure!
The process of turning "water" into AQUAnax creates it in such a way that it penetrates easily and deeply into dirt and grime.
We live in this world constantly surrounded by various bacteria and viruses. Although it is water, AQUAnax can easily eliminate bacteria (e.g. Escherichia coli, Salmonella enterica, and others) that normally exist in the house. Even norovirus can be made ineffective within a matter of "15 seconds"!
These days, we often hear of health problems such as food poisoning and O157:H7 that arise in our everyday life.It's been proven that using AQUAnax for daily cleaning can sterilise fast such bacteria as Escherichia coli and Salmonella enterica.
AQUAnax is also a fast acting and effective measure against the Norovirus.
AQUAnax Bactericidal Efficiency Test: You can expect immediate results against Escherichia coli, Pseudomonas aeruginosa and Salmonella enterica within 15 seconds! (*Note 1)
*Note 1: Results vary depending on the viral species and target solution. See test results below.
AQUAnax Bactericidal Efficiency Test report
(extract: diagram created by Nakajima Sangyo)
Viable Cell Counts of the Test Solution
1) Tested
(Species: Gram-Negative Bacteria): Escherichia coli
Object Solution (Equivalent AQUAnax Product) |
Viable cell count per mL |
0 sec |
15 sec |
30 sec |
60 sec |
Raw water (pH13.1) |
|
5.3×10
5
|
Not detected
(*Note 2)
|
Not detected
(*Note 2)
|
Not detected
(*Note 2)
|
5 times dilution (pH12.5) |
|
9.4×10
3
|
2.6×10
2
|
Not detected
(*Note 2)
|
2) Tested
(Species: Gram-Negative Bacteria): Pseudomonas aeruginosa
Object Solution (Equivalent AQUAnax Product) |
Viable cell count per mL |
0 sec |
15 sec |
30 sec |
60 sec |
Raw water (pH13.1) |
|
6.2×10
5
|
Not detected
(*Note 2)
|
Not detected
(*Note 2)
|
Not detected
(*Note 2)
|
5 times dilution (pH12.5) |
|
5.0×10
2
|
Not detected
(*Note 2)
|
Not detected
(*Note 2)
|
3) Tested
(Species: Gram-Negative Bacteria): Salmonella enterica
Object Solution (Equivalent AQUAnax Product) |
Viable cell count per mL |
0 sec |
15 sec |
30 sec |
60 sec |
Raw water (pH13.1) |
|
8.1×10
5
|
Not detected
(*Note 2)
|
Not detected
(*Note 2)
|
Not detected
(*Note 2)
|
5 times dilution (pH12.5) |
|
1.1×10
2
|
Not detected
(*Note 2)
|
Not detected
(*Note 2)
|
4) Tested
(Species: Gram-Negative Bacteria): Vibrio parahaemolyticus
Object Solution (Equivalent AQUAnax Product) |
Viable cell count per mL |
0 sec |
15 sec |
30 sec |
60 sec |
Raw water (pH13.1) |
|
3.2×10
5
|
Not detected
(*Note 2)
|
Not detected
(*Note 2)
|
Not detected
(*Note 2)
|
5 times dilution (pH12.5) |
|
Not detected
(*Note 2)
|
Not detected
(*Note 2)
|
Not detected
(*Note 2)
|
5) Tested
(Species: Gram-Positive Bacteria): Object Solution(Equivalent AQUAnax Product)
Object Solution (Equivalent AQUAnax Product) |
Viable cell count per mL |
0 sec |
15 sec |
30 sec |
60 sec |
Staphylococcus aureus |
Raw water (pH13.1) |
|
7.0×10
5
|
Not detected
(*Note 2)
|
Not detected
(*Note 2)
|
5 times dilution (pH12.5) |
|
6.3×10
5
|
2.6×10
5
|
(*Note 2)「Not detected」・・・<10
Test conducted by: Japan Food Research Laboratories
Test results issue date: 11 January 2016
Test results issue number: 15126662001-0201
AQUAnax Virus Inactivation Test: Testing against Norovirus. You can expect immediate results within 15 seconds! (*Note 1)
*Note 1: Results vary depending on the viral species and target solution. See test results below.
AQUAnax Virus Inactivation Test Report
(extract: diagram created by Nakajima Sangyo)
Virus Infectivity Measurement Results of the working solution
Tested: Feline calicivirus (Norovirus alternate virus)
Object Solution (Equivalent AQUAnax Product) |
50% Tissue Culture Infective Dose (Log TCID 50/ml)
|
0 sec |
15 sec |
30 sec |
1 min |
15 min |
Raw water (pH13.1) |
|
- |
Not detected
(*Note 3)
|
Not detected
(*Note 3)
|
Not detected
(*Note 3)
|
Not detected
(*Note 3)
|
5 times dilution (pH12.5) |
|
- |
1.7 |
1.6 |
Not detected
(*Note 3)
|
Not detected
(*Note 3)
|
Solution |
Purified Water |
6.7 |
- |
- |
- |
6.5 |
(*Note 3)「Not detected」・・・<1.5 and <2.5
Test conducted by: Japan Food Research Laboratories
Test results issue date: 8 January 2016
Test results issue number: 15126662001-0101
How can water be an alkaline detergent?
pH is a figure expressing the acidity or alkalinity of a solution. A figure closer to 0 indicates more acidity and a figure closer to 14 indicates more alkalinity.
AQUAnax was developed by increasing the water alkalinity to pH scale 13.1 which is the highest standard in the industry.
Having the pH at this level, the product has become more effective and powerful in sterilising and dirt removal. "AQUAnax" continues to receive much support from the customers.
Even with 5 times dilution, there is strong disinfecting power!
For everyday stains, there is sufficient cleaning power even if AQUAnax concentrate is diluted 5-10 times.
It's not only economical by over ¥500 but also removes stains amazingly well!
So, it's easy on the pocket!
It does not contaminate the earth as it consists of water
For everyday stains, there is sufficient cleaning power even if AQUAnax concentrate is diluted 5-10 times. Use the concentrated type for heavy grime and diluted type in the kitchen for everyday use. It's wonderful for the household.
Through the nax Series, we endeavour to create sustainable earth environment for people and nature